5.6 MAC ADDRESS FILTERING

-

 MAC ADDRESS FILTERING

  • Access List merupakan sebuah tool yang digunakan di sisi AP (Access Point) untuk melakukan filtering koneksi dari client. Sehingga AP dapat menentukan client mana saja yang bisa terkoneksi berdasarkan MAC Address dan juga signal-range.
  • Connect list adalah filter autentikasi sebuah wireless client (mode Station) terhadap AP mana yang ingin terkoneksi. Dengan connect list maka dapat ditentukan AP mana yang bisa dikoneksikan ke client berdasarkan MAC address nya. Jadi Connect list digunakan di client untuk menentukan client ini mau konek ke AP yang mana.
  • Default forwart adalah Parameter yang digunakan untuk forwarding traffic dari client ke client yang lain dalam AP yang sama. Bisa dibatasi lebih spesifik per clientnya di access-list
ACCESS LIST
Langkah pertama di Router1(pemancar) membuat security profile pada wlan1, pilih general , kemudian set, nama "bebas", mode "dynamic keys", Authentication Types centang "WPA PSK & WPA2 PSK", WPA Pre-Shared Key "password bebas", WPA2 Pre-Shared Key "password bebas".


Langkah selanjutnya yaitu seeting wifi interface di wlan1 dengan cara klik 2 kali pada wlan1, pilih wireless, lalu ganti mode "ap bridge", band "2GHz-B/G/N", SSID "bebas", security profile "profile1", lalu apply ok.


Dapat dilihat bahwa AP yang dibuat sudah muncul

Langkah kedua, pada router2 disini mengscan AP dari router 1, dan mengganti radio name "bebas" , ganti pula Security Profile dengan Security Profile yang sama seperti router1.

gambar scan

gambar untuk radio dan security

Langkah ketiga kembali lagi pada router1, pada wireless klik "registration", klik kanan pada radio name yang terhubung dan klik "copy to access list". Lalu hilangkan ceklis pada bagian "default authentication".





CONNECT LIST
Langkah keempat yaitu ke wireless interface wlan1, lalu ke wireless, lalu scan, pilih yang akan di hubungkan, setelah itu connect


Langkah berikutnya pada router2 yaitu klik "wireless", lalu "registation", kemudian klik kanan pada radio name yang terhubung , dan klik "copy to connect list" 


Berikut adalah hasil dari connect list



DEFAULT FORWARD


Langkah selanjutnya (Deafault  Forward Client) , ke interface wlan1, lalu ubah mode "station bridge", apply ok


Selanjutnya ke ip dhcp client, +, ubah interface menjadi wlan 1, lalu apply ok



Lalu kita akan mencoba test


Default Forward AP, ke interface hilangkan centang pada "default forward", lalu apply ok.
























Komentar

Posting Komentar

Postingan populer dari blog ini

Configuring a DHCP Server Using PNETLAB

-
Gambar
  Configuring a DHCP Server and Connecting to the Internet   What is DHCP? DHCP (Dynamic Host Configuration Protocol) is a protocol used to facilitate the automatic deployment of IP (Internet Protocol) addresses to other devices. This DHCP configuration does not have to be manually implemented on each computer in order to get a different IP address. This will certainly be troublesome and time-consuming. IP Address or IP address itself is a row of numbers on a device that allows our device to connect to the internet, so that we can access web pages, emails, etc. Well, by using dhcp this IP address can be shared to many devices at one time automatically. That is why these devices are widely applied to networks both small-scale and large-scale. There are also  functions of this DHCP Server , including: Managing and Distributing IP Addresses Preventing IP Conflict Renewing IP Addresses Automatically Supports IP Address Reuse The following i...
Baca selengkapnya

1.3 UPGRADE DAN DOWNGRADE

-
Gambar
 UPGRADE DAN DOWNGRADE 1. Cek versi mikrotikdengan menggunakan terminal "system package pr"   2. Untuk upgrade ke system> packages > check for update > download & install. 3. Untuk melohat sudah download bisa kita lihat disisi kanan bawah. 4. Jika sudah klik (x) 5.  Lalu cek versi di terminal ketik "system package pr". 6. Buka google chrome ketik mikrotik.com klik software > download archive > release 6.48 7. Download routeros-mipsbe-6.48.npk dan tunggu sampai selesai download. 8. Kembali ke winbox klik fles > upload. 9. Upload file yang tadi sudah di download routeros-mipsbe-6.48.npk > open 10. Tunggu upload hingga selesai. 11. Setelah upload selesai kita cek di terminal ketik file print Itu cara untuk upgrade, sekarang cara untuk downgrade 1. Klik system > packages > downgarde 2. Klik yes 3. Lalu cek di terminal ketik system package print.
Baca selengkapnya

HOW TO CALCULATE IP ADDRESS, SUBNET MASK AND NET ID

-
Gambar
  SUBNETTING CONCEPT Subnetting is a material that comes out a lot in the CCNA exam with a variety of questions. It is also a scourge for students or instructors who are completing the CCNA 1 curriculum for the CNAP (Cisco Networking Academy Program) program. To explain about subnetting, I usually use some illustrations and analogies that we are familiar with around us. I wrote this article intentionally for colleagues who are studying networking, who are preparing to take the CCNA exam, and who are taking CCNA 1 training. Actually what is subnetting and why should it be done? this question can be answered with the analogy of a road. The street named Taylor swift consists of several houses numbered 01-08, with house number 08 being the house of the Head of the RT who has the task of announcing any information to all houses in the Jl. Taylor Swift. When there are more houses in the area, of course, it is likely to cause confusion and congestion. Because of that, then another arrange...
Baca selengkapnya