5.3 WIRELESS POINT TO MULTIPOINT

-

WIRELESS POINT TO MULTIPOINT (PTMT)

 Langkah pertama yaitu buka winbox lalu tambahkan IP pada router pemancar dengan ip "10.10.10.1/24" pada wlan1 dan "192.168.1.1/24" pada ether2.



Langkah selanjutnya yaitu enable-kan(ceklis) wlan1 di wireless,WiFi Interface.


Langkah berikutnya yaitu klik 2 kali pada wlan1, tab wireless, lalu ubah mode (ap bridge), SSID (bebas), security profile (profile 1).



Langkah kedua yaitu tambahkan ip pada router penerima dengan ip "10.10.10.1/24" pada wlan1 dan "192.168.2.1/24" pada ether2 untuk penerima pertama.


Dan ip "10.10.10.3/24" pada wlan1 dan "192.168.3.1/24" pada ether2 untuk penerima kedua.



Langkah ketiga yaitu mengscan dari penerima pertama dan penerima kedua ke pemancar.


Langkah terakhir yaitu tes ping 

Tes ping pemancar

Tes ping penerima pertama

Tes ping penerima kedua






Komentar

Posting Komentar

Postingan populer dari blog ini

Configuring a DHCP Server Using PNETLAB

-
Gambar
  Configuring a DHCP Server and Connecting to the Internet   What is DHCP? DHCP (Dynamic Host Configuration Protocol) is a protocol used to facilitate the automatic deployment of IP (Internet Protocol) addresses to other devices. This DHCP configuration does not have to be manually implemented on each computer in order to get a different IP address. This will certainly be troublesome and time-consuming. IP Address or IP address itself is a row of numbers on a device that allows our device to connect to the internet, so that we can access web pages, emails, etc. Well, by using dhcp this IP address can be shared to many devices at one time automatically. That is why these devices are widely applied to networks both small-scale and large-scale. There are also  functions of this DHCP Server , including: Managing and Distributing IP Addresses Preventing IP Conflict Renewing IP Addresses Automatically Supports IP Address Reuse The following i...
Baca selengkapnya

1.3 UPGRADE DAN DOWNGRADE

-
Gambar
 UPGRADE DAN DOWNGRADE 1. Cek versi mikrotikdengan menggunakan terminal "system package pr"   2. Untuk upgrade ke system> packages > check for update > download & install. 3. Untuk melohat sudah download bisa kita lihat disisi kanan bawah. 4. Jika sudah klik (x) 5.  Lalu cek versi di terminal ketik "system package pr". 6. Buka google chrome ketik mikrotik.com klik software > download archive > release 6.48 7. Download routeros-mipsbe-6.48.npk dan tunggu sampai selesai download. 8. Kembali ke winbox klik fles > upload. 9. Upload file yang tadi sudah di download routeros-mipsbe-6.48.npk > open 10. Tunggu upload hingga selesai. 11. Setelah upload selesai kita cek di terminal ketik file print Itu cara untuk upgrade, sekarang cara untuk downgrade 1. Klik system > packages > downgarde 2. Klik yes 3. Lalu cek di terminal ketik system package print.
Baca selengkapnya

HOW TO CALCULATE IP ADDRESS, SUBNET MASK AND NET ID

-
Gambar
  SUBNETTING CONCEPT Subnetting is a material that comes out a lot in the CCNA exam with a variety of questions. It is also a scourge for students or instructors who are completing the CCNA 1 curriculum for the CNAP (Cisco Networking Academy Program) program. To explain about subnetting, I usually use some illustrations and analogies that we are familiar with around us. I wrote this article intentionally for colleagues who are studying networking, who are preparing to take the CCNA exam, and who are taking CCNA 1 training. Actually what is subnetting and why should it be done? this question can be answered with the analogy of a road. The street named Taylor swift consists of several houses numbered 01-08, with house number 08 being the house of the Head of the RT who has the task of announcing any information to all houses in the Jl. Taylor Swift. When there are more houses in the area, of course, it is likely to cause confusion and congestion. Because of that, then another arrange...
Baca selengkapnya