PENJELASAN SEJARAH TENTANG KOMPUTER GENERASI 2

-

 


Komentar

Posting Komentar

Postingan populer dari blog ini

Configuring a DHCP Server Using PNETLAB

-
Gambar
  Configuring a DHCP Server and Connecting to the Internet   What is DHCP? DHCP (Dynamic Host Configuration Protocol) is a protocol used to facilitate the automatic deployment of IP (Internet Protocol) addresses to other devices. This DHCP configuration does not have to be manually implemented on each computer in order to get a different IP address. This will certainly be troublesome and time-consuming. IP Address or IP address itself is a row of numbers on a device that allows our device to connect to the internet, so that we can access web pages, emails, etc. Well, by using dhcp this IP address can be shared to many devices at one time automatically. That is why these devices are widely applied to networks both small-scale and large-scale. There are also  functions of this DHCP Server , including: Managing and Distributing IP Addresses Preventing IP Conflict Renewing IP Addresses Automatically Supports IP Address Reuse The following is the DHCP Ser
Baca selengkapnya

4.1 STATIC ROUTE 2 Router

-
Gambar
STATIC ROUTE 2 Router Setting Topologi dengan menggunakan 2 Router dan 2 PC  Langkah pertama yaitu setting IP Address-nya dengan perintah "ip address add address add address=12.12.12.1/24 interface=ether1" lalu tambahkan lagi "ip address add address=172.16.1.1/24 interface=ether2" kemudian cek ketik "ip address pr" lalu tes ping client PC 1 dengan perintah "ping 172.16.1.2"  Selanjutnya ping di PC 1 apakah bisa gateway dengan IP yang tertera (di blok merah)  Tes Ping "172.16.1.1" lalu ping dari client ke "12.12.12.1", dan jika dilihat, sudah replay, karna masih 1 Router di R1, tetapi jika ping ke "12.12.12.2" dan dilihat bahwa ping-an tersebut tidak replay, karena "12.12.12.2" belum di setting di R2 Selanjutnya setting IP di R2, dengan perintah "ip address add address=12.12.12.2/24 interface=ether1" selanjutnya dengan perintah "ip address add address=172.16.2.1/24" kemudian cek dengan ke
Baca selengkapnya

1.3 UPGRADE DAN DOWNGRADE

-
Gambar
 UPGRADE DAN DOWNGRADE 1. Cek versi mikrotikdengan menggunakan terminal "system package pr"   2. Untuk upgrade ke system> packages > check for update > download & install. 3. Untuk melohat sudah download bisa kita lihat disisi kanan bawah. 4. Jika sudah klik (x) 5.  Lalu cek versi di terminal ketik "system package pr". 6. Buka google chrome ketik mikrotik.com klik software > download archive > release 6.48 7. Download routeros-mipsbe-6.48.npk dan tunggu sampai selesai download. 8. Kembali ke winbox klik fles > upload. 9. Upload file yang tadi sudah di download routeros-mipsbe-6.48.npk > open 10. Tunggu upload hingga selesai. 11. Setelah upload selesai kita cek di terminal ketik file print Itu cara untuk upgrade, sekarang cara untuk downgrade 1. Klik system > packages > downgarde 2. Klik yes 3. Lalu cek di terminal ketik system package print.
Baca selengkapnya